
HAP-045HC is a mechanical paver finisher developed to provide better performance at low maintenance cost. HAP-045HC offers ease of operating and maintaining it.
Smaller, stronger, and economical mechanical paver finisher model HAP-045HC comes with mechanical transmission, hydraulic drive for conveyor, sliding-type control panel, dual operator seats, 2 nos. rear wheels, hydraulically extendable screed with vibration and heating facility.
Hydraulic Conveyor system increases output and reduces maintenance. Auto Limit Control Switch helps to control material flow automatically.
HAP-045HC has basic screed of 2.5 meters width and it is hydraulically extendable up to 4.5 meters.
There is one optional feature available for HAP-045.
Technical Information
Prime Mover | Kirloskar make water-cooled electric start diesel engine, Model 4R 1040TC, 76 hp @ 2200 rpm or equivalent |
---|---|
Power Distribution Gearbox | Only for Conveyor Drive |
Material Laying Capacity | 150 TPH |
Material Laying Thickness | 10 mm (Min) to 200 mm (Max) |
Transmission | Mechanical |
Conveyor Drive | Hydraulic |
Maintenance Shutters | On two side of the machine |
Front Wheel | Solid Rubber Tyre |
Rear Wheel | Pneumatic Tyre |
Operator Panel Type | Sliding Type |
Travelling Function | Left & Right side |
Operating Function | Left & Right side |
Operator Seat | Double Operator Seat |
Machine Steering | Hydrostatic steering for effortless operation. |
Operation Controls | Mechanical |
Speed Reduction Gearbox | Eight-speed reduction gearbox with differential and differential lock arrangement. |
Gears/shaft of gear box | Made from alloy steel and are hardened and ground for efficient working. |
Hopper & Feeding System | Hydraulic |
Hooper Capacity | 4.25 CM |
Auger Screw | Dia 250 mm (10) |
Battery | 12 V DC |
Screed width | 2.5 m basic width, Hydraulically extendable up to 4.5 meters |
Screed Heating | Yes, with 8 LPG burner facility |
Screed Crown | -1 / +4 |
Screed Vibration | Fix Speed |
Screed Tamping | No |
Slope & Grade Control | Manual |
Working Speed | 1.27 to 24 meters/min Max |
Travelling Speed | 16 km/hr (Max.) |
Capacity of Tank | Fuel: 85 L |
Weight | 9,400 kg. approx |
Hopper width | Closed: 2.440 m |
Machinery Length | 5.585 m |
Machinery Height | Working: 3.550m |
Machinery Accessories | 1. Canvas Canopy |
Material Laying Suitability | Bitumen |
Emission Standard | BS-III |
Brake | Calliper disc brakes on both the side |
Conveyor Pump Motor | Danfoss (Germany make) or equivalent |
![]() |
UNIPAVE ENGINEERING PRODUCTS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |